Play IT Forward

Actually, printer cartridge treatment can be done easily. It’s just takes a little patience and knowledge of the brand Printer cartridges used. In this tips, I’ll explains treatment for HP ink cartridges for Deskjet types based on my own experience. For Toner cartridges treatment please read the manual: D

#1. Problem: The ink does not come out or clogged print head (often the case with the color cartridge)

Cause:
* Printer or cartridge rarely used or the temperature in the room that was causing print head to dry.
* Since there are one or more sponge inside the cartridge contains a foam, usually occurs at the time of filling the ink containing air bubbles.

Solution:
* Soak the surface of the cartridge print head in hot water about 2 minutes. After that clean the surface of the print head with tissue.
* If the above is not the way out, too, use (if you do not have please buy) toolkit vacuum that packed ink refill packs .
* Avoid air bubbles during filling of ink by throwing a few ml of ink from the refill ink injections.
* If your printer or cartridge is not used in a long time should be off the cartridge and insert into the plastic clip.

# 2. Problem: When finished filling the ink cartridge and then put back, the printer light blinks (blink)

Cause:
* Generally, users who actually lay at the time of filling the ink could be spilled until the connector points from the cartridge and when put back the scattered, the ink is also about the notch on the back of the cartridge. As the following picture:
* Cartridge has the Set Low Ink by printer and can not be used again.

Solution:
* Clean the surface of the notch and notch the back of the cartridge in the cartridge with tissue.
* Try removing one color or black cartridge, if one cartridge is removed and the printer lights are not blinking cartridge is guaranteed to be a source of problems.
* If still blinking, try cleaning with alcohol 70%, or use contact cleaner liquid special electronic equipment (can be purchased at electronics stores).

# 3 Problem: Printer always display Ink Low message when the ink is refilled

Cause: Cartridge has the Set Low Ink by printer and can not be used again. Keep in mind the HP printer’s manual for the manufacturer recommends purchasing a new cartridge when the ink printer cartridge has been built

Solution:
* Install the printer driver reset by removing the printer driver first before it completely.
* If still blinking reset cartridge (can be found on google or wait posting on this blog article about the topics they will be).

Final solution to the above problems if not managed, recommended once bought a new cartridge for those of you who have a special budget, while those who want to experiment, please wait for my article about the tricks of dealing with clogged print head.

I hope this discussion about HP ink cartridges maintenance will be useful..